Rating: 4.5 / 5 (7419 votes)
Downloads: 44804
>>>CLICK HERE TO DOWNLOAD<<<
Pdf - free download as pdf file (. iso 2248: 1985 packaging - - complete, filled transport packages - - vertical impact test by dropping. iso 2248- 1: 1972 packaging complete, filled transport packages. drop test the attitude of the drop is defined in is) 2248: 1985 [ 3] as the orientation of the package on impact. all protocols type of shock test drop test type of equipment free- fall drop tester in compliance with the apparatus section of. 1 scope and field of application. com is the first single pan- european information point for standards and legislation in europe. genorma is your website for european and international standards, harmonised standards and compliance issues, launched in collaboration with bds and other national standardization bodies. 8 conditioning apparatus— adequate facilities shall be iso 2248 drop test pdf provided for.
pdf), text file (. 2 for containers not exceeding 110 lb ( 50 kg), this test method fulþlls the requirements of iso standards 2206: 19: 1985. 3 impact on any of the lines 12, 34, etc. iso 2233 - packaging - complete, filled transport packages and unit loads - conditioning for testing published by iso on ma this international standard specifies a method for the conditioning of complete, filled, transport packages and unit loads. 1 this test method covers procedures for the drop testing of loaded boxes, cylindrical containers, and bags and sacks by the free- fall method. on either the edge or rim.
the atmospheric conditions, the height of drop and the attitude of the package are predetermined. vertical impact test by dropping emballages - d expkdition complets et pleins - essai de choc vertical par chute libre second editionudc 621. 93 standard confirmed. chamber and control apparatus complying with the apparatus section of iso 2233 or astm d 4332. 2 for containers not exceeding 110 lb ( 50 kg), this test method fulfills the requirements of iso standards 2206: 19: 1985. these iso standards may describe procedures packaging — complete, filled transport packages — part 1: vertical impact test by dropping. 2 impact at any of the points 1, 2, 3, etc. this part of iso 7965 specifies a method of vertical impact testing on a filled paper sack by dropping. caution— these iso standards may describe procedures that do not. an annex gives the predetermined attitude of the test package.
however, since both the silicon wafers and the packaging systems exhibit certain degrees of rotational symmetry, several orientations were not tested. the international agreement concerning the international carriage of dangerous goods by road ( adr) as well as iso 2248 describe the char- acteristics of impact targets for drop tests of dangerous goods packagings. a rectangular box has a total of six unique faces, twelve edges and eight corners. outcome of a drop test.
3 of is0 2206) the centre of gravity of the sack shall be vertically above the face, end or side involved in the impact. 2) the difference in behaviour of a sack, for example, suspended from the top or supported below in an end drop, could be significant. en 22248 vertical impact test by dropping. isoe) descriptors : packing, transport complete- and filled packages, tests, impact drop tests. it may be performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that. iso 2248 or astm d 5276 additional required equipment hazard block: the block shall be made of hardwood or metal. 3 sacks and bags ( see 2.
, parallél to the axis of the cylinder. test objective: the primary objective of the test according to iso 2248 is to examine the effects of a vertical impact on a package. the drop height shall be measured from the top of the timber. 7 for very large containers, it may be necessary to use a hoist, sling, and tripping devices, or a solenoid- operated drop test mechanism and suspension devices, such as those described in appendix x1. 2 release the test package from its predetermined. 1 lift the test iso 2248 drop test pdf package and hold it in the predetermined attitude ( see annex) at a height within ± 2% of the predetermined drop height as defined by the distance between the lowest point on the package at the time of release and the nearest point on the impact surface ( 4. in such instances, the method of holding the package before dropping shall be described in the test report. 1 this is a preview of " iso 2248: 1985". price based on 3 pages.
according to these regulations, the impact target' s surface needs to be unyielding, under testing. principle: raising of the test package above a rigid plane surface and releasing it to strike this surface ( the impact surface) after a free fall. txt) or read online for free. the test can be used as an independent test to measure impact resistance, or it can be integrated into a series of tests to evaluate the overall performance of a package in a distribution system. these iso standards may describe procedures that do not meet. principle: raising of the test package above a rigid plane surface and releasing it to strike this surface ( the " impact surface" ) after a free fall.
2) the difference in behaviour of a sack, for example, suspended from the top or supported below in an and drop, could be significant. packaging - complete, filled transport packages - vertical impact test by dropping ( iso 2248: ss- en 22248.
留言列表
